Dyna Aquaban 200 (Pro-Shield)

DESCRIPTION

DYNA® AQUABAN 200 (Pro-Shield) Waterproofing & Anti-Fracture Membrane is a thin, loadbearing waterproofing designed specifically for the special requirements of ceramic tile, stone and brick installations. A self-curing liquid rubber polymer and a reinforcing fabric are quickly applied to form a flexible, seamless waterproofing and crack isolation membrane that bonds to a wide variety of substrates.

ADVANTAGES

- Inhibits stain causing mold and mildew growth in the substrate with antimicrobial product protection.
- Safe, no solvents and non-flammable.
- Interior and exterior use.
- Vertical and horizontal surfaces (including ceilings)
- Thin - 0.5 mm (0.02”) thick when cured
- Anti-fracture protection of up to 3 mm (1/8”) over shrinkage and other non-structural Cracks.
- Extra Heavy Service rating per TCNA (ASTM C627 Robinson Floor Test).
- IAPMO and ICC Approval.
- Applies quickly with a paint brush, roller, or trowel.
- Fast cure—ready in hours for finishes.
- Install tile, brick and stone directly onto membrane.
- Easy cleanup—use water while fresh.
- Protects concrete & reinforcing steel from corrosion.

COLORS

Color: Blue

USES

- Swimming pools.
- Fountains & water features.
- Shower pans.
- Stalls.
- Tub surrounds.
- Bathrooms & laundries (industrial, commercial & residential).
- Spas.
- Hot tubs.
- Kitchens & food processing areas.
- Terraces & balconies over unoccupied spaces.
- Countertops.
- Facades.
- Steam rooms (when used in conjunction with a vapor barrier).

LIMITATIONS

- Do not use as a primary roofing membrane over occupied space.
- Do not use over expansion joints, structural cracks or cracks with vertical differential movement.
- Do not use over cracks >3 mm (1/8”) in width.
- Do not use as a vapor barrier (especially in steam rooms).
- Not for use directly over particle board, luan, Masonite®, or hardwood floors.
- Do not expose unprotected membrane to sun or weather for >30 days.
- Do not expose to negative hydrostatic pressure, excessive vapour transmission or solvents.
- Must be covered with ceramic tile, stone, brick, concrete, screeds, terrazzo or other traffic-bearing course.
- Do not install directly over single layer wood floors, plywood tubs / showers / fountains or similar constructs.

SUITABLE SUBSTRATES

Concrete, cement mortar beds, cement plaster, concrete and brick masonry, Exterior Glue, Plywood, Gypsum Wallboard, ceramic tile and stone, cement terrazzo, cement backer board.